Sentry III Controller 

To get a copy of the Warranty 

SET
​How to set the WKL controller 
Good for all WKL, WKCE & WKSL models

REPLACE
​How to replace the WKL controller 
Good for all WKL, WKCE & WKSL models

Bottom of Unit View

Unit Performance Test (LINK)
Here Is a way to test a unit that may not be cooling correctly.
Good to test all units
Please call our service department after you have tested the unit to review your results. 
  

If you have any questions about your cooling unit please contact our service department during business hours M-F 7am-3pm PST at 1-(858)-566-7465 with your *Model and Serial number to better serve you. Below are a few LINKS that may HELP with any issues you may have. 
​Thank You

Find some helpful video's on our           YouTube Channel

Breezaire Channel

Links below are printable PDF files and links

Click on to in large

​​​Drain Tube (LINK)
In all WKL models 
​Please view the video's below and review the instructions for installation of the drain tube. 

Return for Service Form (LINK)
If your unit is over 12 months old please fill out and return a copy of this return form with the unit. No returns on WKS or WKSL systems. Do not return via US Mail. Any unit under 12 months please contact our service department. Do not return units over 10 years old. 

WKSL Install Questionnaire Form(LINK)

​Used to test the WKSl model. 
​Please call our service department after you have tested

the unit to review your results.

The LINK above is a list of (*service company's) that other customers have worked with in the past.

*NOTE These service company's are not affiliated with Breezaire and are not covered under Breezaire Factory Warranty. Using them will VOID any remainder of your warranty. 


                                                                    Breezaire Warranty Page LINK 

Service & Tech Help 

RESET
​How to reset the WKL controller 
Good for all WKL, WKCE & WKSL models

Factory drop off for service(LINK) 

Provide an air gap to avoid

Airlocks occur when bubbles in the pipeline gather at a high point in the system. If the water velocity is not greater than the rising velocity of the air bubbles, the air will remain in the pipe and cause a restriction.

Inside View