The WKL 2200 models are manufactured with the cold air out the front (standard) or out the top of unit (special order).
WKL BLACK Series (upgrade)
All factory modification and upgrades will be a longer lead-time. All modification and upgrades may not be cancelled or returned.
RDF Rear Drain Fitting
Not only have we changed the color we have made the base out of Stainless Steel.
The BLACK series is a upgraded WKL model.
They will be a Special Order only.
Please ask your dealer for more info
and Upgrade Pricing
Unit Modification & Upgrades are below
Unit Modification & Upgrades:
There are six models to choose from:
All units are 115 Volt, 60 Hz
Enclosure Electrical Dimensions (in) Weight
Model Volume (max)
WKL 1060 140 cu.ft. 3 Amps 14.25W x 13.25H x 16.38D 45 lb.
WKL 2200* 265 cu.ft. 4 Amps 14.25W x 13.25H x 16.38D 55 lb.
WKL 3000 650 cu.ft. 5 Amps 14.25W x 19.75H x 21.63D 76 lb.
WKL 4000* 1000 cu.ft. 7 Amps 14.25W x 19.75H x 21.63D 81 lb.
WKL 6000 1500 cu.ft. 9.5 Amps 16.25W x 22.00H x 22.25D 101 lb.
WKL 8000 2000 cu.ft. 10 Amps 16.25W x 22.00H x 22.25D 101 lb.
*WKL 2200 & WKL 4000 models are is available in a 220v - 50 hz (Model WKL 2150 & WKL 3350)
This is the advanced system of choice for standard applications ranging from under 100 to 2000 cubic feet. WKL Series systems are compact, self-contained units. Our performance speaks for itself. This series is equipped with the Sentry III+ control system.
Sentry III+ control system offers the following features:
Large, easy to read, cool green display.
Accurate, easy to adjust temperature set points with continuous display of cabinet temperature.
Power outage protection.
Blocked airflow protection, which shuts down unit and protects wine in case of high temperatures caused by condenser blockage or fan failure.
Controls temperature by enclosure (cellar) air sensors or optional bottle probe. Units are shipped from the factory fully charged and ready for use when mounted in a wall and connected to 115 AC volt source.
For more detailed information go to the WKL Installation Instructions
WKL Products Page
All WKL model have a drain tube located in the base of the unit on the cold side.
Breezaire can install a drain fitting on the rear of the unit. (RDF Rear Drain Fitting)
The drain fitting is for removal of condensate. Connect a ½ inch I.D. vinyl hose to the fitting and route the hose to an approved drain. Ensure the ½ inch I.D. vinyl hose has an air break installed with in 2 to 10 inches from unit connection. A condensate pump is required if the vinyl drain hose has any vertical rise, significant horizontal or near horizontal run.
Located on the lower left-hand side on the rear of the unit.
The WKL Series BLACK models (special order).
MODELS Available in:
The 3000 thru 8000 models are shipped from the factory with the unit configured with the cold air routed out the front (Standard). The installer can configure the cold air to be routed out the top (as pictured below).
Cold Air out the top (modified by the installer)
Standard with cord out front
Special Order:Power cord out the rear (COB)
All six models come with the electric cord out the front (standard) or can be routed out the rear (special order).
Special Order: Hot Air Out the Top (HAU)
Standard: Hot Air out the rear
The 2200 thru 8000 models are manufactured with the hot air out the rear (standard) or out the top of unit (special order).
Standard WKL 2200 with Cold Air out front
Special Order: WKL 2200 Cold Air out the top. (CAU)
All Breezaire products are manufactured in San Diego CA USA
since 1985 with foreign and domestic component.
All Rights Reserved Copyright © Breezaire ®