Link to APP 
​Never Pick Another Bad Wine

RESET
​How to reset the WKL controller 
Good for all WKL, WKCE & WKSL models

Return for Service Form
If your unit is over 12 months old please fill out and return a copy of this return form with the unit. No returns on WKS or WKSL systems. Any unit under 12 months please contact our service department.   

If you have any questions about your cooling unit please contact our service department during business hours M-F 7am-3pm PST at 1-(858)-566-7465 with your Model and Serial number to better serve you. Below are a few LINKS that my HELP with any issues you my have. 
​Thank You

Find some helpful video's on our YouTube Channel

Suggested Equipment you my find them helpful  

Breezaire Channel

Calculate Your Power Consumption
How to calculate your electricity consumption
LINK to power consumption calculator 

WKSL Install Questionnaire Form

​Used to test the WKS & WKSl model 
​Please call our service department after you have tested the unit to review your results.

Links below are printable PDF files.

​Using a smart phone and a QR Scanner 
Scan the QR on the label and you can save the unit information on your files and link to our website. 

Sentry III Controller 

®

               Box Label 
​On the outside of all boxes is a product model and serial number label

Notes from some of our customers 

Unit Performance Test

Here Is a way to test a unit that may not be cooling correctly.
Good to test all units
Please call our service department after you have tested the unit to review your results. 
  

Drain Tube
In all WKL WKE models 
​Please view the video's below and review the instructions for installation of the drain tube. 

®

®

QUICK NOTE:
E1 Code on display 
During the initial power-up of the unit or restart, you should leave the door to your wine cellar or cabinet closed, in order to allow the unit to effectively cool the storage space before storing your wines. If the initial temperature is above 70°F and insufficient cooling is detected by the temperature sensor in the unit within the first 30 minutes of operation, the unit will automatically shut off, and the display will flash alternately “E1” and the temperature. You may unplug it for 10 minutes or more. You may need to repeat the 30min on and 10min off a couple of times for the cellar to get below 70°F. 

Bottom of Unit View

Inside View

Measuring Relative Humidity
Suggested Test Equipment #12 7012

REPLACE
​How to replace the WKL controller 
Good for all WKL, WKCE & WKSL models

Serial Number Location (see picture) & Definition Form

​Where to locate the model & serial number sticker.
​Good for all models.

***All returned units must be delivered on or before 12/17

               or please hold them till until after the Jan 1st 2019 

            Serial Number Location  
​        On WKSL model (Splits) behind the grills

Winery and Restaurants We Work With 

WKE SENTINEL II  Control Test Readings

Here is a test for the SENTINEL II control settings
Good for all WKE Model.
​Please call our service department after you have tested the unit to review your results.
 

®

LINKS to contact:

SET
​How to set the WKL controller 
Good for all WKL, WKCE & WKSL models

LINK