Takes you to the Home Page This Button will take you to our Products Page for a journey through our product lines. This button will take you to our special listing of our approved dealer near you. This button will take you to a detailed instructions that you can down load. This button will take you to a page that is filled with information that that is good to know. This button will take you to some interesting construction information.  


This button will take you back to our Products Home page.  This button will take you to additional information about our WK self contained models. This button will take you to additional information about our WKL self contained models. This button will take you to additional information about our WKE self contained models. This button will take you to additional information about our WKS split models.

The BREEZAIRE WKC/WKCE Series cooling units are a compact design with cold air discharge on the bottom, which makes them ideal to be installed in cabinets.

Because of their configuration the WKC/WKCE series cooling units are not rated for specified number of cubic feet. They are intended for cabinets and other constricted enclosures. Ask your BREEZAIRE Dealer for details.

The WKC cooling unit comes with two (2) optional thermostat systems. Mechanical (WKC Model) or Digital Electronic (Sentry III) (WKCE Model).

The WKC Model has a mechanical thermostat and its adjustments requires a 1/4" straight type screwdriver. Turning the adjusting screw clockwise lowers the set point, counter-clockwise raises it.



The WKCE Model has a digital electronic (Sentry III) thermostat that adds additional safety and convenience features:


  • Large, easy to read, green LED display.
  • Accurate, easy to adjust (no tools needed) readable set points with continuous reading of enclosure temperature or displaying of set point when changing enclosure temperatures.
  • Power outage protection, which delays unit start up after power outages.
  • Blocked airflow protection, which shuts down unit and protects wine in case of high temperatures caused by condenser blockage.
  • Controls temperature by enclosure air sensors or optional bottle probe.



Units are shipped from the factory fully charged and ready for use when mounted in a wall and connected to 115 AC volt source.

There are two sizes and four models to chose from:

BREEZAIRE Model Electrical Dimensions (in) Weight
WKC 1060 3 Amp 18W x 10.5H x 16.5D 45 lb.
WKCE 1060 3 Amp 18W x 10.5H x 16.5D 45 lb.
WKC 2200 4 Amp 18W x 10.5H x 16.5D 55 lb.
WKCE 2200 4 Amp 18W x 10.5H x 16.5D 55 lb.

Notes:

  1. All units are 115 Volt, 60 Hz.
  2. All cabinet Units can be manufactured with the Hot air out the rear (standard) or out the top of unit (special order).
  3. Both cabinet models come with the electric cord out the front (standard) or can be routed out the bottom near the rear of the unit (special order).

For more detailed information go to the WKC/WKCE Installation Instructions.



Copyright © 2002-2005 Breezaire Products Company. All rights reserved. BREEZAIRE Logo and Breezaire are registered trademark of Breezaire Products Company. Unauthorized reproduction, distribution, or use without the consent of Breezaire Products Company may result in severe civil and criminal penalties, and will be prosecuted to the maximum extent possible under California and Federal Trademark and Copyright laws.
Designed and maintained by BREEZAIRE Products