When our self-contained series will not meet your needs then the WKSL split design will provide the flexibility needed to create an ideal installation or deal with unusual site problems. BREEZAIRE WKSL Series cooling systems are special split systems that allow mounting of the cooling (evaporator) module in the enclosure to be cooled and the exhaust (condenser) module as far as 50 feet away. The systems are designed – when installed in a properly constructed enclosure – to provide a constant selectable temperature between 48 and 63 degrees Fahrenheit while maintaining 50 to 75 percent relative humidity.
|
WKSL Series systems are designed for easy installation by any, properly equipped, qualified air conditioning or refrigeration service technician. Two copper tubes and low voltage wiring connect the two modules and power is hard wired to the units using adequately sized 110 AC volt electrical source. These systems must be charged with refrigerant during installation. The WKSL series uses BREEZAIRE’s Sentry II+ digital control system for complete control of the enclosure conditions. |
 |
There are two models to choose from:
| BREEZAIREModel | Enclosure Volume | Electrical | Dimensions (in) | Weight |
| WKSL 2200 Fan/Coil | 265 cu.ft. | 1 Amp | 14.25W x 14.125H x 7.75D | 25 lb. |
| WKSL 2200 Condenser | 265 cu.ft. | 4 Amps | 14.25W x 14.125H x 11.25D | 35 lb. |
| WKSL 4000 Fan/Coil | 1000 cu.ft. | 1.5 Amps | 14.25W x 19.75H x 12.38D | 45 lb. |
| WKSL 4000 Condenser | 1000 cu.ft. | 7.5 Amps | 14.25W x 19.75H x 12.38D | 55 lb. |
Notes:
- The WKSL 2200 is shipped from the factory with the unit configured with the cold air routed out the front (standard) or out the top of unit (special order).
- The WKSL 4000 is shipped from the factory with the unit configured with the cold air routed out the front with the option of routing the cold air out the top by the installer.
For more detailed information go to the WKSL Installation instructions