breezaire.com

WKSL Series

admin — Mon, 28 Jun 2010 12:00:22 +0000

When our self-contained series will not meet your needs then the WKSL split design will provide the flexibility needed to create an ideal installation or deal with unusual site problems. BREEZAIRE WKSL Series cooling systems are special split systems that allow mounting of the cooling (evaporator) module in the enclosure to be cooled and the exhaust (condenser) module as far as 50 feet away. The systems are designed – when installed in a properly constructed enclosure – to provide a constant selectable temperature between 48 and 63 degrees Fahrenheit while maintaining 50 to 75 percent relative humidity.

WKSL Series systems are designed for easy installation by any, properly equipped, qualified air conditioning or refrigeration service technician. Two copper tubes and low voltage wiring connect the two modules and power is hard wired to the units using adequately sized 110 AC volt electrical source. These systems must be charged with refrigerant during installation. The WKSL series uses BREEZAIRE’s Sentry II+ digital control system for complete control of the enclosure conditions.

There are two models to choose from:

BREEZAIREModel	Enclosure Volume	Electrical	Dimensions (in)	Weight
WKSL 2200 Fan/Coil	265 cu.ft.	1 Amp	14.25W x 14.125H x 7.75D	25 lb.
WKSL 2200 Condenser	265 cu.ft.	4 Amps	14.25W x 14.125H x 11.25D	35 lb.
WKSL 4000 Fan/Coil	1000 cu.ft.	1.5 Amps	14.25W x 19.75H x 12.38D	45 lb.
WKSL 4000 Condenser	1000 cu.ft.	7.5 Amps	14.25W x 19.75H x 12.38D	55 lb.

Notes:

The WKSL 2200 is shipped from the factory with the unit configured with the cold air routed out the front (standard) or out the top of unit (special order).
The WKSL 4000 is shipped from the factory with the unit configured with the cold air routed out the front with the option of routing the cold air out the top by the installer.

For more detailed information go to the WKSL Installation instructions

WKC Series

admin — Mon, 28 Jun 2010 10:12:15 +0000

The BREEZAIRE WKCE Series cooling units are a compact design with cold air discharge on the bottom, which makes them ideal for installation in cabinets.

Because of their configuration the WKCE series cooling units are not rated for specified number of cubic feet. They are intended for cabinets and other constricted enclosures. Ask your BREEZAIRE Dealer for details.


The WKCE has a digital electronic (Sentry III+) control system which features:
Large, easy to read, green LED display. Accurate, easy to adjust (no tools needed) readable set points with continuous reading of enclosure temperature or displaying of set point when changing enclosure temperatures. Power outage protection, which delays unit start up after power outages. Blocked airflow protection, which shuts down unit and protects wine in case of high temperatures caused by condenser blockage. Controls temperature by enclosure air sensors or optional bottle probe.

Units are shipped from the factory fully charged and ready for use when mounted in a wall and connected to 115 AC volt source.

There are two sizes to chose from:

BREEZAIREModel	Electrical	Dimensions (in)	Weight

WKCE 1060	3 Amp	18W x 10.5H x 16.5D	45 lb.

WKCE 2200	4 Amp	18W x 10.5H x 16.5D	55 lb.

Notes:

All units are 115 Volt, 60 Hz.
All cabinet Units can be manufactured with the Hot air out the rear (standard) or out the top of unit (special order).
Both cabinet models come with the electric cord out the front (standard) or can be routed out the bottom near the rear of the unit (special order).

For more detailed information go to the WKCE Installation Instructions.

WKL Series

admin — Mon, 28 Jun 2010 09:57:10 +0000

This is the advanced system of choice for standard applications ranging from under 100 to 2000 cubic feet. WKL Series systems are compact, self-contained units. Our performance speaks for itself. This series is equipped with the BREEZAIRE’s affordable Sentry III control system. This system offers more features that others offer in their higher-grade models.

The BREEZAIRE’s Sentry III control system offers the following features:

Large, easy to read, cool green LED display
Accurate, easy to adjust temperature set points with continuous display of cabinet
temperature.
Power outage protection.
Blocked airflow protection, which shuts down unit and protects wine in case of high
temperatures caused by condenser blockage or fan failure.
Controls temperature by enclosure (cellar) air sensors or optional bottle probe.

Units are shipped from the factory fully charged and ready for use when mounted in a
wall and connected to 115 AC volt source.

There are six models to choose from:

BREEZAIRE Model	Enclosure Volume	Electrical	Dimensions (in)	Weight
WKL 1060	140 cu.ft.	3 Amp	14.25W x 13.25H x 16.38D	45 lb.
WKL 2200	265 cu.ft.	4 Amp	14.25W x 13.25H x 16.38D	55 lb.
WKL 3000	650 cu.ft.	5 Amp	14.25W x 19.75H x 21.63D	76 lb.
WKL 4000	1000 cu.ft.	7 Amp	14.25W x 19.75H x 21.63D	81 lb.
WKL 6000	1500 cu.ft.	9.5 Amp	16.25W x 22.00H x 22.25D	101 lb.
WKL 8000	2000 cu.ft.	10 Amp	16.25W x 22.00H x 22.25D	101 lb.

Notes:

All units are 115 Volt, 60 Hz.
The 1060 and 2200 models are manufactured with the cold air out the front (standard) or out the top
of unit (special order).
All six models can be manufactured with the hot air out the rear (standard) or out the top of unit
(special order).
All six models come with the electric cord out the front (standard) or can be routed out the rear
(special order).
The 3000 thru 8000 models are shipped from the factory with the unit configured with the cold air
routed out the front with the option of routing the cold air out the top by the installer.

For more detailed information go to the WKL Installation Instructions.

WKE Series

admin — Fri, 25 Jun 2010 12:46:32 +0000

Featuring the Exclusive BREEZAIRE Sentinel II Microprocessor Control System. WKE Series systems with the SENTINEL II microprocessor-based control system are the most advanced systems available on the market. No other company offers the BREEZAIRE Sentinel II performance at any price.

SENTINEL II features a separate control panel with an LCD display that can be mounted on the cabinet or in a remote location. The control panel provides a constant readout of the temperature, including a separate alarm indicator light, which allows the user to change all operating parameters at any time. Built-in diagnostic routines display trouble codes on the LCD. Optionally the system can be connected to a home alarm system.

The system also automatically controls fan speed to reduce energy use and noise while providing the optimum cooling under all conditions. WKE Series systems are compact, self-contained units.

Units are shipped from the factory fully charged and ready for use when mounted in a wall and connected to 115 AC volt source.

There are four models to chose from:

BREEZAIRE Model	Enclosure Volume	Electrical	Dimensions (in)	Weight
WKE 3000	650 cu.ft.	5 Amps	14.25W x 19.75H x 21.63D	76 lb.
WKE 4000	1000 cu.ft.	7 Amps	14.25W x 19.75H x 21.63D	81 lb.
WKE 6000	1500 cu.ft.	9.5 Amps	16.25W x 22.00H x 22.25D	101 lb.
WKE 8000	2000 cu.ft.	10 Amps	16.25W x 22.00H x 22.25D	101 lb.

a)   All units are 115 Volt, 60 Hz.
b)   All four models can be manufactured with the hot air out the rear (standard) or out the top of unit (special order).
c)   All four models come with the electric cord out the front (standard) or can be routed out the rear (special order).
d)   All four models are shipped from the factory with the unit configured with the cold air routed out the front with the option of routing the cold air out the top by the installer.
e)   All four models may be ordered with optional leads for connection to external alarm system. (special order)

For more detailed information go to the WKE Installation Instructions